Pi Connect Lite V2

AUD $75.00

The Pi-Connect Lite (V2) is a HAT that allows for the professional and reliable integration of a Raspberry Pi onto a UAV (or any other automated vehicle). It contains a high quality power supply, telemetry connector and power switch.

Only 9 left in stock

SKU: B-PICL2 Category:


Simplify your project integration with the Pi-Connect Lite, a professional-grade HAT add-on board engineered to streamline Raspberry Pi connectivity with ArduPilot and PX4 flight controllers.

The Pi-Connect Lite consolidates essential features into a single, compact board, ensuring a seamless integration process:

  • 5.1V/3.5A low noise power supply with high quality components
  • Telemetry port for connection to ArduPilot or PX4 based flight controllers
  • Power button for safety shutting down the Raspberry Pi (requires software configuration in the Pi. See documentation for details)

It is 100% compliant with the Raspberry Pi HAT specification (using the uHAT size) and is compatible with the Raspberry Pi 2, 3, 4, 5 Zero and Zero2.

The board also features a power button which safely switches off the Pi via issuing a shutdown signal. This ensures the Pi is shut down properly and reduces the risk of system corruption.


The Pi-Connect Lite contains a high-end power supply, specifically designed for powering the Raspberry Pi and any attached USB devices (such as cameras). It has the following features:

  • Designed in Australia
  • XT30 power connector
  • Wide input voltage (7 – 30V)
  • High efficiency power supply (minimum 78%, typically 86%+)
  • Reverse input protection
  • ESD protected
  • Supplies a full 5.1V at 3.5A for the Pi and any connected USB devices
  • Overcurrent and short circuit protection
  • Low EMI and EMC
  • Additional UART for the Pi 4 and 5

A standard telemetry port allows Ardupilot/PX4 flight controllers to easily connect to the Pi:

  • 1x Telemetry (serial) port using a JST-GH 6-pin DroneCode standard connector


  1. Telemetry cable is sold separately. Scroll down for store links to both.
  2. The Product Manual can be found at https://www.docs.rpanion.com/products/pi-connect-lite-v2

The major changes from the V1 board are:

  • Power connector changed to XT30
  • Power switch changed to power button
  • Lower EMI/EMC
  • Additional JST-GH telemetry port

Additional information

Weight 0.1 kg
Dimensions 6.5 × 3.5 × 4 cm
HS Code